RSSArchives: February 2008
February 29, 2008
MAKE Primer - Electronic test equipment
Electronic Test Equipment by Tom and Wendell Anderson. See and understand what's happening inside a circuit. Page 158 - MAKE 10. Read this article now in the MAKE digital edition.
Or get MAKE 10 from the Maker store and/or subscribe to MAKE (use code CMAKE for $5 off USD).
You can view all our in depth Primers from MAKE here too.
Posted by Phillip Torrone |
Feb 29, 2008 09:22 PM
Electronics |
Permalink
| Comments (3)
| Email Entry
Hack Your Brain - Best of Weekend Projects
This weekend on Best of Weekend Projects with Bre Pettis, learn how to hack your brain by making Mitch Altman's Brain Machine! It flashes LEDs into your eyes and beeps sounds into your ears to make your brain waves sync up into beta, alpha, theta, and delta brainwaves!
Mitch invents cool things that make the world a better place. He's well known for the TV-B-GONE and this brain machine is his latest project. One of the cool things about this project, is that it builds on an open source project. Mitch used Lady Ada's open source MiniPOV and switched out LEDs and added new capacitors and resistors and then rewrote the firmware to make it into the brain machine. It's super cool when people make hardware open source so that others can work with it!
Make sure to take pictures of your build and of you in your brain machine and upload them to the Make: flickr pool.
Get the podcast and pdf downloaded automatically in itunes. - Link
Posted by Eric Michael Beug |
Feb 29, 2008 08:00 AM
MAKE Podcast |
Permalink
| Comments (3)
| Email Entry
Hacking VGA with Arduino
Cool visualization on a monitor via Arduino
An arduino board is controlling the RGB lines of a VGA connection to an LCD monitor. However, the horizontal and vertical sync lines are being generated by a proper computer.- Code and info on Little-Scale - Link
Related:
Arduino TV - Link
In the Maker store:
"Critter & Guitari" Cellular Automata Video Synthesizer Kit - Link
Posted by Collin Cunningham |
Feb 29, 2008 05:00 AM
Arduino |
Permalink
| Comments (0)
| Email Entry
Digital Camera Interface
Getting a computer to "talk" with a CMOS camera can be difficult, if not impossible, at times. The site has links to PDF files that contain the schematics and theory of operation. There is also a link containing all the code. It's a nice solution to a common problem.
The aim of this project is the development and construction of an interface between a CMOS camera and a computer. This interface allows a user to get images from the camera, to change some of the properties of the camera as brightness, luminance, etc from a computer. Also some image process is implemented allowing the camera to track white objects and follow them with a servomotor. The interface was implemented using the Atmel AVR ATmega16 microcontroller.
Digital Camera Interface - Link
Posted by Marc de Vinck |
Feb 29, 2008 03:00 AM
Electronics |
Permalink
| Comments (0)
| Email Entry
Arduino compatible breadboard
This is a nice little tutorial on building your own Arduino compatible breadboard. The heeart of the board is an AMTEL8 AVR and breakout board from SparkFun. It is a fairly easy build, but if you just want to jump right into programming pick up a completed version in the MAKE store! - Link
Posted by Marc de Vinck |
Feb 29, 2008 02:00 AM
Arduino, DIY Projects, Electronics |
Permalink
| Comments (0)
| Email Entry
Wiimote controlled curtains
Controlling your curtains via a Wiimote is either laziness at its best, or a great solution for those with mobility issues. The curtains can be controlled from a wall switch, but even that could be problematic for some people. This could definitely be a great help for some people. - Link
Related:
Track fingers with the Wiimote - Link
Posted by Marc de Vinck |
Feb 29, 2008 01:00 AM
Electronics |
Permalink
| Comments (0)
| Email Entry
February 28, 2008
Simple walking bot
Matt Mets made this simple servo-controlled walking bot which uses a Barebones Arduino to walk, one leg at a time. Source code included. - Link.
Posted by Becky Stern |
Feb 28, 2008 09:00 PM
Arduino, DIY Projects, Electronics, Robotics |
Permalink
| Comments (0)
| Email Entry
Vibrobot from a speaker and pull-cord toy
Randy made his own version of the Bristlebot, but with a speaker and pull cord. Excellent, and with renewable propulsion! I like the little resistor antlers/feelers - Link.
Related:
HOW TO - Make a Bristlebot a tiny directional vibrobot made from a toothbrush! - Link.
Bristlebot racing snail - Link.
Posted by Becky Stern |
Feb 28, 2008 07:00 PM
DIY Projects, Robotics, Toys and Games |
Permalink
| Comments (1)
| Email Entry
Readybot will clean your kitchen
Dishwashers are so last week. I want a Readybot! Not only will this robot clean the dishes, it will tidy up the whole kitchen and you don't even have to give it an allowance. Hopefully this will become a reality soon, because I need one...NOW! - Link
Posted by Marc de Vinck |
Feb 28, 2008 04:00 PM
Robotics |
Permalink
| Comments (4)
| Email Entry
Claytronics nanoscale robot designs
You may know of Claytronics (aka programmable matter) - the use of reconfigurable nanoscale robots to form shapeshifting objects.
Researchers at Carnegie Mellon University have proposed several basic robotic designs as possible foundations for claytronics, including:
- Planar catoms test the concept of motion without moving parts and the design of force effectors that create cooperative motion within ensembles of modular robots.
- Electrostatic latches model a new system of binding and releasing the connection between modular robots, a connection that creates motion and transfers power and data while employing a small factor of a powerful force.
- Stochastic Catoms integrate random motion with global objectives communicated in simple computer language to form predetermined patterns, using a natural force to actuate a simple device, one that cooperates with other small helium catoms to fulfill a set of unique instructions.
- Giant Helium Catoms provide a larger-than-life, lighter-than-air platform to explore the relation of forces when electrostatics has a greater effect than gravity on a robotic device, an effect simulated with a modular robot designed for self-construction of macro-scale structures.
- Cubes employ electrostatic latches to demonstrate the functionality of a device that could be used in a system of lattice-style self-assembly at both the macro and nano-scale.
Videos and detailed info @ Carnegie Mellon - Link
Shape-shifting robot forms from magnetic swarm @ New Scientist - Link
Related:
Claytronics - Link
Posted by Collin Cunningham |
Feb 28, 2008 03:00 PM
Robotics, Science |
Permalink
| Comments (0)
| Email Entry
Robotic dream playback
"Sleep Waking" by Fernando Orellana and Brendan Burns presents a new way to look back on one's dreams. EEG, EKG, REM, and various other physical data is logged during the subject's sleep and then later used as the script to direct robotic action -
The eye position data we simply apply to the position the robot's heads is looking. So if my eye was looking left, the robot looks left.What? No electric sheep? - Link
The use of the EEG data is a bit more complex. Running it through a machine learning algorithm, we identified several patterns from a sample of the data set (both REM and non-REM events). We then associated preprogrammed robot behaviors to these patterns. Using the patterns like filters, we process the entire data set, letting the robot act out each behavior as each pattern surfaces in the signal. Periods of high activity (REM) where associated with dynamic behaviors (flying, scared, etc.) and low activity with more subtle ones (gesturing, looking around, etc.). The "behaviors" the robot demonstrates are some of the actions I might do (along with everyone else) in a dream.
Posted by Collin Cunningham |
Feb 28, 2008 02:00 PM
Robotics |
Permalink
| Comments (0)
| Email Entry
Ladybug maintenance bot
She may look like one, but don't call her a "bug" - The "Lady Bird" autonomous robot was introduced to Western Japan's highway rest stops in November of 2007 to maintain restroom cleanliness as well as friendliness -
In addition to cleaning, Lady Bird can engage in simple conversation with restroom users, thanks to microphones in its "antennae," speech recognition capabilities and a voice synthesizer. The robot has access to the latest information about traffic conditions on nearby roads, which it can relay to anyone comfortable enough to ask.I believe I might feel less than "comfortable" if I met Lady Bird during a late night, highway bathroom break. - Link
Related:
Jumbo cleaning robots - Link
Posted by Collin Cunningham |
Feb 28, 2008 01:00 PM
Robotics |
Permalink
| Comments (0)
| Email Entry
Rules for Roboticists
In honor of Robot Day here on MAKE, I've posted my "Rules for Roboticists," from my 2004 book Absolute Beginner's Guide to Building Robots. It's a playful list of operating principles, rules of thumb, and words o' wisdom about bot building. The piece is accompanied by robot scientist "trading cards," illustrated by Mark Frauenfelder, for the book.
11. A roboticist should know when to come back later (A.K.A. "The Kenny Rogers Rule")
When you're building anything, especially something as complicated as a robot, the build can sometimes get ugly. If you try to force your way through, you can often dig yourself into an even deeper hole. So here's what you do: "Put the soldering iron down. Step away from the steaming robot entrails!" You'll be amazed at what an hour away, vegging in front of the TV, rolling around on the floor with the cat, or sleeping on your problem will do. It almost never fails. Here's a corollary: The extent to which you don't want to drop what you're doing and take a break ("I know I can fix this, damn it!"), is inversely proportional to the extent to which you need a break. Why is it the Kenny Rogers Rule? Cause "you got to know when to hold 'em, know when to fold 'em, and know when to walk away..."
Rules for Roboticists - Link
Posted by Gareth Branwyn |
Feb 28, 2008 11:00 AM
Makers, Robotics |
Permalink
| Comments (0)
| Email Entry
Cute bot alert!
From the MAKE Flickr pool
. . . not autonomous, not motor driven, not even powered - just plain cute.
Farnea's Audrey robots #1, - Link & #2 - Link
Related:
Homemade robot costume - Link
Posted by Collin Cunningham |
Feb 28, 2008 10:00 AM
Crafts, Robotics |
Permalink
| Comments (1)
| Email Entry
LEGO unicycle robot keeps its balance
This Lego Unicycle Robot balances on one wheel and uses RCX Lego Mindstorms bricks with 4 sensors and three tires to maintain its balance. It stays upright by directly powering the wheel. Really nice video above of the whole thing in action.
Yet Another LegWay - [via]
Posted by Jonah Brucker-Cohen |
Feb 28, 2008 08:00 AM
LEGO |
Permalink
| Comments (1)
| Email Entry
Send SMS to control Robosapiens
This project by Tim Redfern allows onlookers to send SMS messages to Robosapien robots who respond with some impressive dance moves. The system uses a custom built, downloadable Xtra for (Macromedia/Adobe) Director called "UIRT XTRA" that is free from the site below. Check out the video.
Dancing Robosapiens - Link, UIRT Xtra Download
Posted by Jonah Brucker-Cohen |
Feb 28, 2008 07:43 AM
Robotics |
Permalink
| Comments (0)
| Email Entry
Heathkit HERO
Back in the 1982, Heathkit released the HERO 1 educational robot. HERO 1 had a Motorola 6808 CPU and 4k of RAM on board. He came equipped with motion, light, sound and sonar ranging sensors. You could even add an optional arm attachment and max out his capabilities.
Taking a cue from the success of the HERO 1, Heathkit's consumer division released a simplified version, the HERO Jr - with half the ram of it's predecessor and a lower pricepoint. Later still, the expandable, speech capable HERO 2000 was released to the educational market. By far the most advanced iteration, the 2000 would be the last training robot released by the company. That is until now - Heathkit is planning to release a reincarnation of HERO, the HE-RObot:
Popular Science explains -
Built on a Mini-ITX mobo with Intel Core Duo microprocessor and using Windows XP for its operating system (unlike the model 914 PC-BOT which can be outfitted with Ubuntu), HE-RObot is being built and priced towards the educational market. A market that sorely needs a sophisticated robot platform. The hobbyist DIY market, on the other hand, could suffer from sticker shock. The HE-RObot's 914 PC-BOT counterpart is priced from $5,000 - $8,000 which could make the HE-RObot a tough sell to even the most rabid roboticist.Personally, I prefer the boxy look of the old model anyway. (Instead of this boxy looking new version) - [via] Link
Detailed HERO History on Robotgallery.com - Link
Check out Donnie V. Savage's site for a bunch of relevant build info - Link
Related:
Heathkit schematic diagram archive - Link
Posted by Collin Cunningham |
Feb 28, 2008 05:00 AM
Robotics |
Permalink
| Comments (9)
| Email Entry
DIY K-9
Here's an excellent recreation of the K-9 (Mk II, I believe) from the BBC's classic Doctor Who series. The maker did a very thorough job on the panelling and used an RC tank for locomotion - unfortunately no design measurements are supplied in the build documentation. - Link
Of course that's not the only K-9 in service, here's one built around a Linux PC to promote a school's robotics class -
The first robot to roam the halls of GHCA is K9, a robot dog based on the British sci-fi show, Doctor Who. I created K9 myself as a way to jump-start our Robotics program. K9's main purpose is to "ooh and ahh" students, hopefully encouraging an interest in the field of robotics. I used common angle iron and 1/4 nuts and bolts to assemble K9's "skeleton", much like an Erector Set from years gone by. In fact, K9's head was built using an Erector Set from 1971! Sheet metal provides the finished look for our class mascot.Now where's that Gentoo-based Sarah Jane? - Link
Related:
HOW TO - make a Dalek - Link
Posted by Collin Cunningham |
Feb 28, 2008 04:00 AM
Robotics |
Permalink
| Comments (0)
| Email Entry
How to build your first PICAXE robot
This is a nice tutorial on building your first PICAXE robot. These aren't as easy to build as a BEAMbot, but they can do a whole lot more. The site contains links to suppliers and lots of photos of the build process. - Link
Posted by Marc de Vinck |
Feb 28, 2008 03:00 AM
Robotics |
Permalink
| Comments (0)
| Email Entry
Stair climbing robot
This robot is small, purpose-built, and can easily climb stairs. The website has a lot of photos and is a great source of technical information for stair climbing robots. If you are thinking of building something similar, this is a must-read.
StairBOT is a small robot for indoor environments. On even floor it drives like many other small robots with a differential-drive. In addition it can change its length with linear guides mechanism with a spindle-drive. By this mechanism it can - together with its omniwheels (with brakes) and a support - reliably climb up and down regular sized stairs. It was one of the objectives for the design to use as few actuators and sensors as possible.
The StairBot - Link
Posted by Marc de Vinck |
Feb 28, 2008 02:00 AM
Robotics |
Permalink
| Comments (0)
| Email Entry
Features and more @ MAKE!
Get MAKE 14 - Subscribe or on newsstands!
Add MAKE to iGoogle - GoogleGoogle.
Add MAKE to your RSS reader - Real simple.
Add MAKE on Twitter.
Add MAKE on FriendFeed & the MAKE room.
Why advertise on MAKE?
Read what folks are saying about us!
Click here to advertise on MAKE!
Phillip Torrone
Senior Editor
Tel: 707-827-7311
Gareth Branwyn
Robot Maker
Kip Kay
Video Maker
Jonah Brucker-Cohen
Artist / Researcher
Natalie Zee Drieu
Senior Editor
CRAFT
Becky Stern
Culture jammer
Collin Cunningham
Sound Maker
Marc de Vinck
CNC Maker
Current Podcast
Weekend Project: The Streamerator (PDF)
Launch streams of toilet paper in mid-air. The ultimate TP machine. Thanks go to Professor Greg Arius of the Phenomenauts for the original article in Make Volume 8View the PDF...
More...
